https dealers.hobbyetc.com - dealers.hobbyetc.com

• home
• order history
• current order
• browse
• price list
• access key
• upload
• dropship admin

part number	ERVT46M01		part number, quantity
bar code	083745293197
	46t Mod 1 Steel Spur Gear E Revo 2 XO-1
	1.4146 oz
retail	29.88
sale price	29.88

Hot Racing 46 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the TRA E Revo2, 6S and 8S, Mxx 4S, XO-1.XRT and Sand Car FEATURES: - CNC machined hardened steel construction - Black oxide finished - Laser etched tooth count marking YOU WILL RECEIVE: - One (1) 46 tooth, 1.0 modulus steel spur gear REQUIREMENTS: - Do NOT use the pin system for setting the gear mesh. Instead, manually set the gear mesh without the pins. Refer to the TRA manual for instructions (ref. pg.22 - Adjusting Gear Mesh) - With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them. SPECIFICATIONS: - Overall diameter: 48.7mm - Gear face width: 8mm COMMENTS: - Replace TRA plastic 6447 or 6447X 54T spur gear This item is intended for these models: Traxxas E-Revo 2.0 Maxx Maxx Slash Pro Scale 2WD Sand Car X-Maxx X-Maxx 8S XO-1 XRT 8S