https dealers.hobbyetc.com - dealers.hobbyetc.com

• home
• order history
• current order
• browse
• price list
• access key
• upload
• dropship admin

part number	VXS9282X02		part number, quantity
bar code	083745854275
	Steel Helical Spiral Gear Set w/ Aluminum Cover Plate - Tra 1/16
	0.6688 oz
retail	43.88
sale price	43.88

Hot Racing steel helical spiral differential gear set for TRA 1/16 4X4 vehicles, including the 1/16 E-Revo, 1/16 Slash 4X4, and 1/16 Summit. This set is compatible with the front or rear differentials. FEATURES: - CNC machined aluminum and hardened high carbon steel construction - Aluminum carrier cover plate is anodized red - Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than the factory bevel cut gears YOU WILL RECEIVE: - One (1) steel 39T ring gear - One (1) steel 15T pinion gear - One (1) aluminum carrier - One (1) aluminum carrier cover plate REQUIREMENTS: - Two sets per vehicle - Reuses TRA 7082 internal spider and carrier gears, as well as the output shaft seal and outdrives from the original differential - Installation may require shimming for proper gear mesh. The gears should run freely without too much play and without binding. (If shimming are needed use Hot Racing W4X Shim) - Use removable thread lock (blue threadlocking compound) on carrier screws - Differential grease (Spl10G02) SPECIFICATIONS: - Carrier width: ~23mm - Carrier bearing boss diameter: 8mm - Pinion length: ~19.5mm COMMENTS: - Does not include inner differential gears. - Replaces TRA 7079 ring and pinion and 7080 carrier cover plates (except for the output shaft seal) - Shimming the differential correctly is an important step in building the perfect differential. If needed more shims may be purchased via Hot Racing part number W8X. description revised by: SN July 11, 2016 This item is intended for these models: Traxxas 1:16 E-Revo 1:16 Slash/Rally 4WD 1:16 Summit