https dealers.hobbyetc.com - dealers.hobbyetc.com

• home
• order history
• current order
• browse
• price list
• access key
• upload
• dropship admin

part number	SRVO1029T		part number, quantity
bar code	083745900309
	Steel Helical Spiral Differential Ring/Pinion Gear Set (29t/10t)
	1.4240 oz
retail	48.88
sale price	48.88

Hot Racing optional helical spiral differential gear set for the many 1/10 scale TRA vehicles. This item replaces TRA 5379X; please check your TRA manual to verify your model uses the 5379X gear set. The Hot Racing ring and pinion set is know to fit the E-Maxx front/rear diffs, the E-Revo front/rear diffs, the Rally VXL front diff, the Revo 3.3 front/rear diffs, the Slash 4X4 front diff, the Slayer Pro 4X4 front/rear diffs, the Summit 4X4 front/rear diffs, the Telluride 4X4 front diff, the T-Maxx 3.3 front/rear diffs, Stampede 4x4 front Diffand the XO-1 front diff. FEATURES: - Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than the factory bevel cut gears - 29T/10T high torque gear ratio reduces torque twist - Construction: high carbon steel - Nitride case hardened for a long-wearing gear surface and a tough core - Compatible with the front or rear differential that use TRA5379X YOU WILL RECEIVE: - One (1) 29-tooth differential ring gear - One (1) 10-tooth differential pinion gear REQUIREMENTS: - Requires four (4) M2.5 flat head cap screws for installation - Shimming may be required for optimal alignment and fit - Hot Racing SPL10G05 high temp grease recommended - Best to use with Hot Racing RVO11L06 or the ultimate choice RVO11MX01 COMMENTS: - This item replaces TRA 5379X; please check your TRA manual to verify your model uses the 5379X gear set. The Hot Racing ring and pinion set is know to fit the E-Maxx front/rear diffs, the E-Revo front/rear diffs, the Rally VXL front diff, the Revo 3.3 front/rear diffs, the Slash 4X4 front diff, the Slayer Pro 4X4 front/rear diffs, the Summit 4X4 front/rear diffs, the Telluride 4X4 front diff, the T-Maxx 3.3 front/rear diffs, Stampede 4x4 Front diff. Rustler 4x4 and the XO-1 front diff. - For six cell power Aluminum Outer Diff Case is a must; Revo and T-Maxx use RVO11L06, Summit use SUM11LH - Not intended for on road operation if the differential is replaced with a spool or locker This item is intended for these models: Traxxas 1:10 Jato 4x4 E-Maxx 3903 Brushed E-Maxx 3905 E-Maxx 3906 E-Maxx 3908 Brushless E-Revo 5603 5605 5608 Hoss 3S LCG Slash 4x4 or Rally Revo 3.3 5308 (2008 models) Revo 3.3 5309 Rustler 4x4 Rustler 4x4 EHD Slash 4x4 (2024 and older) Slash 4x4 EHD Slayer 5908 Stamede 4x4 EHD Stampede 4x4 VXL Summit T-Maxx 3.3 4907 Telluride 4X4 trail rig XO-1